| MANUFACTURER |
John Deere |
| MODEL |
110 TLB |
 |
| Tractor Unit |
|
|
| |
Engine |
--- |
|
|
|
| |
|
Type |
Diesel, Direct Injection |
|
|
|
| |
|
Manufacturer/Model |
Yanmar/TNV88 |
|
|
|
| |
|
Gross Eng. HP (kW) @ Rated Speed |
43.0 (32.1) @ 2600 |
|
|
|
| |
|
Net Eng. HP (kW) @ Rated Speed |
41.0 (30.6) @ 2600 |
|
|
|
| |
|
PTO Output HP (kW) @ Engine Speed |
33.0 (24.6) @ 2600 |
|
|
|
| |
|
Hydraulic HP (kW) |
30.9 (23.1) |
|
|
|
| |
|
Cylinders |
4 Cylinders |
|
|
|
| |
|
Total Displacement, cu. in. (l) |
133.6 (2.2) |
|
|
|
| |
|
Fuel consumption, 75% load, gal./hr. |
2.0 (7.5) |
|
|
|
| |
|
Restart |
Auto-bleed |
|
|
|
| |
|
Cold Start Assist |
Air Preheat Coil |
|
|
|
| |
|
Rated Speed, rpm |
2600 |
|
|
|
| |
Electrical |
--- |
|
|
|
| |
|
Volts/Alternator |
12V/40 Amp Standard, 55 Amp Optional
|
|
|
|
| |
|
Battery CCA |
650 |
|
|
|
| |
|
Alternator Amperes |
40 Standard; 55 Optional |
|
|
|
| |
|
Starter Size, HP (kW) |
2.7 (2.0) |
|
|
|
| |
Hydraulics |
--- |
|
|
|
| |
|
Type |
Open Center |
|
|
|
| |
|
Number of Pumps |
3 |
|
|
|
| |
|
Total Flow, gpm (l/m) |
23.6 (89.2) |
|
|
|
| |
|
System Pressure, psi (kPa) |
3000 (20,684) |
|
|
|
| |
|
Hydraulic Flow to Loader, gpm (l/m) |
12.2 (46.1) |
|
|
|
| |
|
Hydraulic Flow to Backhoe, gpm (l/m) |
16.3 (61.5) |
|
|
|
| |
|
Oil Cooler |
Steel, Thick Core, 190 sq. in.
(123,024 sq. mm) |
|
|
|
| |
Capacities |
--- |
|
|
|
| |
|
Fuel Tank, gal. (l) |
15.3 (58) |
|
|
|
| |
|
Crankcase with Filter, gal. (l) |
1.25 (4.9) |
|
|
|
| |
|
Cooling System, gal. (l) |
2.4 (9) |
|
|
|
| |
|
Transmission and Hydraulic System,
gal. (l) |
15.0 (57) |
|
|
|
| |
|
Transmission Case and Filter, gal. (l) |
9.7 (37) |
|
|
|
| |
|
Transmission and Hydraulic Oil |
HyGard J20C or HyGard J20D Cold
Service |
|
|
|
| |
|
Front Axle Gearcase (MFWD axle), gal.
(l) |
1.3 (4.9) |
|
|
|
| |
Drivetrain |
--- |
|
|
|
| |
|
Transmission Type |
--- |
|
|
|
| |
|
Transmission Controller |
--- |
|
|
|
| |
|
Transmission Ranges/Speeds |
--- |
|
|
|
| |
|
Clutch; Wet/Dry |
--- |
|
|
|
| |
|
Creeper |
--- |
|
|
|
| |
|
Creeper Location |
--- |
|
|
|
| |
|
Range Speeds |
--- |
|
|
|
| |
|
Maximum Traveling Speed, mph (k/h) |
--- |
|
|
|
| |
Steering |
--- |
|
|
|
| |
|
Type |
Hydrostatic Power |
|
|
|
| |
|
Turn Angle |
58 Degrees |
|
|
|
| |
|
Turns Lock-to-Lock |
--- |
|
|
|
| |
Powertrain |
--- |
|
|
|
| |
|
Front Axle |
--- |
|
|
|
| |
|
MFWD Engagement |
--- |
|
|
|
| |
|
Front Axle Oscillation |
--- |
|
|
|
| |
|
Front Differential |
--- |
|
|
|
| |
|
Final Drives |
--- |
|
|
|
| |
Brakes |
--- |
|
|
|
| |
|
Type |
Wet Disk, Inboard |
|
|
|
| |
|
Actuation |
Mechanical |
|
|
|
| |
|
Parking Brake |
Automotive Style Lever |
|
|
|
| |
|
Turning Brakes |
Individual |
|
|
|
| |
Rear Power Take Off |
--- |
|
|
|
| |
|
Type |
Fully Independent |
|
|
|
| |
|
Speed, rpm |
540 @ 2,600 Engine RPM |
|
|
|
| |
|
PTO Engagement |
Solenoid Operated Clutch |
|
|
|
| |
|
PTO Clutch |
Wet, Multi-Disk |
|
|
|
| |
|
PTO Brake |
Wet, Multi-Disk |
|
|
|
| |
Tires |
--- |
|
|
|
| |
|
Front |
10x16.5, 8 PR |
|
|
|
| |
|
Rear |
17.5Lx24, 8 PR |
|
|
|
| |
|
Tread Pattern |
Industrial (R4) Standard; Turf (R3)
Optional |
|
|
|
| |
Rear Hitch |
--- |
|
|
|
| |
|
3-Point Hitch |
Category I Standard; Field Installed
Optional |
|
|
|
| |
|
Control Type |
Position only |
|
|
|
| |
|
Lift Capacity @ link ends, lb. (kg) |
--- |
|
|
|
| |
|
Lift Capacity @ 24-in. behind lift
point, lb. (kg) |
2500 (1134) |
|
|
|
| |
|
Drawbar Hitch |
Field Installed Optional |
|
|
|
| |
Operator Station |
--- |
|
|
|
| |
|
Steering |
Non-Tilt |
|
|
|
| |
|
Direction Control |
Dual Foot Pedal |
|
|
|
| |
|
Instrumentation |
Right Side Console |
|
|
|
| |
|
Seat Conversion |
Roll Over |
|
|
|
| |
|
Canopy |
Curved Polyethelyne |
|
|
|
| |
|
Rollover Protective Structure |
4-Post, SAE J1040 to 9000 lb. |
|
|
|
| |
|
Falling Object Protective Structure |
Canopy Sheet, ISO 3449 Level 1 |
|
|
|
| |
|
Standard Lighting |
2 55 Watt Canopy Mounted |
|
|
|
| |
|
Warning Lights |
Canopy Mounted |
|
|
|
| |
|
Stop/Brake Lights |
Rear, Canopy Mounted |
|
|
|
| |
|
Transmission Presence Safety System |
Yes |
|
|
|
| |
|
PTO Presence Safety System |
Yes |
|
|
|
| |
|
Backhoe Presence System |
Yes |
|
|
|
| Loader Unit |
|
|
| |
Model |
John Deere |
|
|
|
| |
Design |
--- |
|
|
|
| |
|
Type |
Closed Box Construction Style Lift
Arms |
|
|
|
| |
|
SCV Control |
Single Lever Tractor Mount |
|
|
|
| |
|
Boom Control Valve System |
Series Type |
|
|
|
| |
|
Masts |
Ductile Cast Iron, Z-Form Webbing
|
|
|
|
| |
|
Boom Bushings |
Replaceable |
|
|
|
| |
|
Pin Service |
End-Of-Pin Greasing |
|
|
|
| |
|
Bucket Anti-Roll-Back Device |
Mechanical |
|
|
|
| |
|
Auxiliary Front Hydraulics |
Optional Factory Installed |
|
|
|
| |
|
Bucket Quik-Coupler |
Standard |
|
|
|
| |
|
Bucket Mounting Plates |
Skid Steer Loader |
|
|
|
| |
|
Bucket Mounting Plate Area, sq. in.
(m2) |
270 (174,193) |
|
|
|
| |
|
Standard Bucket Width, in. (mm) |
72 (1829) |
|
|
|
| |
|
Anti-Rollback Devise |
Mechanical |
|
|
|
| |
Dimensions |
--- |
|
|
|
| |
|
Lift Height to Pivot Pin, in. (mm) |
114.8 (2917) |
|
|
|
| |
|
Reach at Max. Lift Height, in. (mm) |
--- |
|
|
|
| |
|
Max. Dump and Rollback Angle |
--- |
|
|
|
| |
Performance |
--- |
|
|
|
| |
|
Lift Cap. to Max Height/Pivot Pins,
lb.(kg) |
2727 (1237) |
|
|
|
| |
|
Lift Cap. to Max. Height, lb. (kg) |
2042 (926) |
|
|
|
| |
|
Breakout Force @ Pivot Pins, lb./ft.
(N) |
--- |
|
|
|
| Backhoe Unit |
|
|
| |
Model |
John Deere |
|
|
|
| |
Design |
--- |
|
|
|
| |
|
Construction |
Boxed Construction from High Strength,
Low Alloy Steel, Robotically Welded |
|
|
|
| |
|
Backhoe Controls |
Two Lever, Direct Linkage |
|
|
|
| |
|
Boom Type |
Curved, Fully Closed |
|
|
|
| |
|
Swing Frame |
Cast Iron |
|
|
|
| |
|
Boom and Crowd Cylinder Mounting |
In-Line, Pinned |
|
|
|
| |
|
Swing Cylinder Mounting |
Cast in Trunions, Cast-Iron Mounting
|
|
|
|
| |
|
Cylinder Rod Plating |
Nickel Chrome |
|
|
|
| |
|
Cylinder Rod Harness |
HRC58 |
|
|
|
| |
|
Cylinder Rod End Attachment |
Friction Welded |
|
|
|
| |
|
Stabilizer Feet |
Cast Iron, Reversible |
|
|
|
| |
|
Aux. Hyd. Opt. (7th Function Valve) |
Factory Installed |
|
|
|
| |
|
Bucket Linkage |
John Deere Power Link with Guide Link
|
|
|
|
| |
|
Swing Lock Mechanism |
Lift Pin |
|
|
|
| |
|
Boom Lock Mechanism |
Lever Actuated Hook, Rubber Cushioned
|
|
|
|
| |
|
Stabilizer Angle Rearward |
18 Degree |
|
|
|
| |
|
Bucket Couplers Available |
Std. Pin on/Opt. Mech. Coupler |
|
|
|
| |
|
Bucket Sizes Available, in. |
12, 16, 18, 20, 24, 30, 36 |
|
|
|
| |
Dimensions |
--- |
|
|
|
| |
|
Max. Digging Depth, in. (mm) |
121 (3073) |
|
|
|
| |
|
Digging Depth/2-ft. Flat Bot., in.
(mm) |
--- |
|
|
|
| |
|
Truck Loading Height, in. (mm) |
101 (2567) |
|
|
|
| |
|
Reach from Swing Pivot, in. (mm) |
158.1 (4016) |
|
|
|
| |
|
Boom Swing Arc |
180 Degree |
|
|
|
| |
|
Bucket Rotation Arc |
190 Degree |
|
|
|
| |
|
Stabilizer Spread-Oper., in. (mm) |
98 (2489) |
|
|
|
| |
|
Leveling Angle |
13 |
|
|
|
| |
Performance |
--- |
|
|
|
| |
|
Digging Force-Crowd, lb. (kN) |
3764 (16.743) |
|
|
|
| |
|
Digging Force-Bucket, lb. (kN) |
5723 (25.457) |
|
|
|
| |
|
Side Swing Force, lb./ft. (kN/m) |
7,975 (10.8) |
|
|
|
| |
|
Boom Lift Capacity at Ground Level,
lb. (kg) |
1216 (552) |
|
|
|
| |
|
Dipperstick Lift Capacity at 8-ft.
above ground, lb. (kg) |
1499 (680) |
|
|
|
| Overall Dimensions |
|
|
| |
Tractor Wheelbase, in. (mm) |
71.5 (1815) |
|
|
|
| |
Transport Height-Backhoe Folded, in.
(mm) |
--- |
|
|
|
| |
Transport Length-Backhoe Folded, in.
(mm) |
--- |
|
|
|
| |
Transport Width-Incl. Front Bucket,
in. (mm) |
--- |
|
|
|
| |
Curb Turning Radius w/o Brakes, in.
(mm) |
144 (3568) |
|
|
|
| |
Curb Turning Radius w/Brakes, in. (mm) |
124 (3150) |
|
|
|
| |
Bucket Clearance Circle w/o Brakes,
in. (mm) |
--- |
|
|
|
| |
Bucket Clearance Circle w/Brakes, in.
(mm) |
--- |
|
|
|
| |
Operating Weight w/Backhoe, lb. (kg) |
--- |
|
|
|
| |
Operating Weight w/Loader and Box
Blade, lb. (kg) |
7280 (3302) |
